hide

Filter Results By:

Products

Applications

Manufacturers

Show Filters

Showing results: 301 - 315 of 374 items found.

  • High-Voltage Test Hood

    HVE900 - LXinstruments GmbH

    The large, bright test room with a ball-bearing cover is designed for high production quantities. Thanks to the easily exchangeable exchangeable plate, retrofitting for testing different products is also a simple task. Product properties: External dimensions (W * D * H) approx. 940 * 716 * 640mm Usable test space (W * D * H) approx. 750 * 500 * 460mm Contacting Installation space approx. 100mm high under removable plate Dielectric strength min 10kV Application area up to 2000m above sea level Pollution degree 1 without condensation Standard conformity EN50191 / EN61010-1 Schmersal safety switch AZM161 with guard locking Lid is supported by ball bearings for high number of cycles, the bearings can be easily exchanged for servicing Optionally available, Not included in the price: - Red / green signal light - Mobile substructure trolley with 19 "

    Product Home Contact/Sales Datasheet Company Catalog Add To List

  • LIGHT RANGER MUTT

    TT9103 - Matco Tools

    *Portable and water resistant trailer light tester and trailer brakes tester that allows the user to perform all testing functions without the use of the vehicle*Tests 7-spade, 6-round and 4/5-flat pin type trailer harnesses*Short circuit protection*Turn signal simulation and power verification LED*Water resistant*Trickle charger and trailer plug adapter includedInternal battery compartment (battery not included)

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • Analog And Digital Insulation Testers

    Meco Instruments Pvt. Ltd.,

    High AccuracyRange Selection & Single Person Push Button OperationLCD Back Light Function with Indicator SwitchData Holding Function, Function Icons on DisplayMeasurement of AC Voltage upto 600VACMeasurement of Phase Sequence between (Phase-PhaseVoltage)with LED Indicator Auto Range (Insulation Test)LED Indicator for High VoltageInbuilt Protection Circuit to prevent the harm of reverse voltagesBattery Operated with AC Adaptor3 Ranges of Voltage & Insulation Resistance

    Product Home Contact/Sales Company Catalog Add To List

  • 20 Amp Current Transformer Burden Test Set

    1044A - The Eastern Specialty Company

    Due to overwhelming demand, TESCO is pleased to re-introduce the 1044A 20 Amp Current Transformer Burden Test Set. This light weight, hand held unit is a simple and inexpensive means whereby a current transformer installation may be quickly checked for many sources of trouble. The 1044A provides utilities a less expensive and more traditional option for checking larger services for potential meter circuit related issues.

    Product Home Contact/Sales Datasheet Manual Company Catalog Add To List

  • Personal Safety Voltage Detector

    388 SVD - Standard Electric Works Co., Ltd

    ● Warning Proximity of AC Voltage (240V~69kV). ● Protection class: IP65.● Easy-to-wear on body or belt. ● Ultra high bright LED indication.● High pitch sound indication.● The sound level can reach up to 90dB.● Test & diagnostic circuitry.● Friendly priority alert reporting. ● Circuit test function.● High impact type casing.● Different alerting sound & light.● Meets EN 61326-1.● Dimension : 114(L) × 67(W) × 27(D)mm● Weight : Approx. 152g (battery included)● Power supply : 9V(6F22) × 1

    Product Home Contact/Sales Datasheet Company Catalog Add To List

  • Colorimetry, Turbidity & UV-Vis Spectrophotometry

    Thermo Fisher Scientific Inc.

    Colorimetry, turbidity, and spectrophotometry meters for water analysis. You can choose from 134 preprogrammed methods to measure the concentrations of sample components with our colorimetry meters. These portable meters can go with you anywhere to test drinking water or wastewater. Take your portable turbidity meter to the source for on-site measuring. Our turbidity meters feature white and infrared light sources allowing you to meet regulatory methods. Achieve simple and efficient water and wastewater analysis with our UV-Vis and Vis spectrophotometers. These meters include over 260 preprogrammed methods using common reagent chemistries, making them the ideal instruments to include in your laboratory.

    Product Home Contact/Sales Company Catalog Add To List

  • Duplex Double Test Insertion/Return Loss Test Station

    JW8302 - Shanghai Joinwit optoelectronic Tech,co.,Ltd

    JW8302 Duplex double test Insertion/Return Loss Test Station is a professional equipment to test CWDM device, multi-wavelength device, PLC, fiber optical patch cord and other passive optical devices. It is a new-generation precision optical instrument of JOINWIT who combined with so many years  experience in optical passive detection. It equipped with VFL or 850 light source , supporting threshold determination, automatic multi-wavelength detection, system integration, secondary development, upper computer solution, etc. Double LC interface or other different interfaces can be tested simultaneously which is convenient for testing and improves efficiency; The  VFL function could automatic on and off, no need to replace the connector.

    Product Home Contact/Sales Company Catalog Add To List

  • Portable CCD Spectroradiometer

    LMS-6000 - Lisun Electronics Inc.

    The Portable CCD Colorimeter Spectroradiometer has the following versions which can measure different parameters: • LMS-6000: illuminance (lux), E(Fc), Ee(W/m2), Tc (K), Duv Correlated Color Temperature (CCT), Chromaticity Coordinates, CRI, Purity, Peak Wavelength, Dominant Wavelength, Half Bandwidth, Center Wavelength, Centroid Wavelength, Total Color Difference, Brightness Difference, Red-Green Degree, Yellow-Blue Degree, CCT Difference, SDCM Diagram, Spectrum Diagram • LMS-6000L: cd/m2, fL, Tc (K), Duv Correlated Color Temperature (CCT), Chromaticity Coordinates, CRI, Purity, Peak Wavelength, Dominant Wavelength, Half Bandwidth, Center Wavelength, Centroid Wavelength, Total Color Difference, Brightness Difference, Red-Green Degree, Yellow-Blue Degree, CCT Difference, SDCM Diagram, Spectrum Diagram • LMS-6000P: LMS-6000 Parameters+PAR, PPFD, YPFD, Blue-purple irradiance Eb, Yellow-green irradiance Ey, Red-orange irradiance Er, Ratio of red and blue radiation Erb_Ratio • LMS-6000S: LMS-6000 Parameters+PAR, PPFD, YPFD, Blue-purple irradiance Eb, Yellow-green irradiance Ey, Red-orange irradiance Er, Ratio of red and blue radiation Erb_Ratio, Rf and Rg according to TM-30 • LMS-6000F: LMS-6000 Parameters+Flicker test • LMS-6000B: LMS-6000 Parameters+Blue Light Hazard Weighted Irradiance according to GB/T20145, CIE S009/E:2002 • LMS-6000BF: LMS-6000 Parameters+Flicker test, Blue Light Hazard Weighted Irradiance according to GB/T20145, CIE S009/E:2002

    Product Home Contact/Sales Video Company Catalog Add To List

  • Relay / Magnetic Field Testers

    PeakTech Prüf- und Messtechnik GmbH

    Ideally suited for checking magnetic fields and the correct function of coils, e.g. Relays and solenoid valves. The magnetic field detector works without contact, so that opening the housing is not necessary in most cases. When a magnetic field is detected, the probe tip lights up permanently blue, with clocked relays in the same cycle as they are controlled. The function of the magnetic field detector can be checked before each measurement with the enclosed test permanent magnet.

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • Fully Automatic Transformer Winding Resistance Tester

    Neutronics Manufacturing Co.

    Measure DC resistance of transformers windings etc. Introduction: The NMC ''TDR'' is a high precision, new generation, light weight large output current and micro-processor controlled tester. This replaces old DC wheat stone bridge and double arm bridge for measurement of DC resistance. ''TDR'' adopts new advanced test current power supply technology, four terminal measurement, digital display of resistance value and test current. ''TDR'' is powered by 220V AC mains single phase supply. The measurements are accurate as the test current is highly stable. High automation is achieved with automatic discharge warning.Principle: The constant current generated is fed to the resistance under test through the current terminals and the voltage drop across the resistance under test is measured and displayed in ohms. A true four terminal measurement is used to eliminate the need for lead resistance compensation.

    Product Home Contact/Sales Datasheet Company Catalog Add To List

  • IP X3, X4 - Rain Test Chamber

    ACMAS Technologies Pvt. Ltd.

    The rain water or moisture penetrating through a leak in the case, can often reach into the circuit board and lead to failure of the equipment. This problem is frequently encountered with external equipments and devices during storage, usage or transportation in a rainy weather. Therefore, the automotive industries and various research and developmental units often use Rain Test Chambers to test the quality and performance of the product in such extreme environments.Weiber's Rain Test Chambers are such Rain Testing Machines/Chambers used for the testing of automobiles, electronic parts and components, light equipments, voltage cabinets and other wide variety of products under a rainy environment. These IP Test Chamber and IP Testing Chambers are designed to simulate specific environmental conditions, mimicking a natural rainy weather, to test the seals and water proofing capacity of the equipment and devices, thereby providing an estimation of the product performance over a period of time.

    Product Home Contact/Sales Company Catalog Add To List

  • Integrating Sphere With Holder Base

    IS-*MA - Lisun Electronics Inc.

    1. The hold base can bear max 20kg, it can expanding to test all lamps such as E27/E40, all tubes such as T5/T8/T12, and all kinds of luminaries2. The hold base can be installed in the ceiling or down, it can be adjusted the height3. Hold base has four power cables connect to the outside Power Supply and max is 5KW4. The holder base is detachable. For some kinds of light sources you may need to change the position of the holder base.5. Diameter: IS-0.3M (0.3m), IS-0.5M (0.5m), IS-1.0MA (1.0m), IS-1.5MA (1.5m), IS-1.75MA (1.75m), IS-2.0MA (2.0m). Other sizes can be designed according to the customer’s request.6. The painting of integrating spheres is according to CIE Pub. No.84 (1989)

    Product Home Contact/Sales Company Catalog Add To List

  • Sensor Bodies

    optek

    The armature - assembled sensor body - is the central component of an inline photometer. We have already designed more than 1000 different sensor bodies and more than 50 types are always on stock. All optek inline sensor bodies are made from high quality materials and are machined with extreme precision. The quality-tested manufacturing tolerances allow optical path lengths of up to 1000 mm, for which the accuracy of the incoming and outgoing light beam is ensured by testing a laser-based coaxiality tolerance test to the reference axis. To cover a wide spectrum of different process conditions, optek sensor bodies can be manufactured from various materials (also for aggressive chemicals or with NACE MR 0175) and adapted with regards to:

    Product Home Contact/Sales Distributors/Reps Company Catalog Add To List

  • Textile Testing Instruments

    Dongguan Amade Instruments Technology Co., Ltd

    Textile testing instruments are developed to determine the quality and performance of various fibrillar component fabrics, structural fabrics, garments, home textiles and other textiles by physical and chemical methods in conformance with international standards. By using scientific testing methods to judge the quality of materials or final products, manufacturers of textiles are capable of detecting the defects and unqualified products to correct problems in time, conducive to reducing loss and maintaining the business reputation. Testings cover tensile strength, tearing strength, seam slippage, joint strength, bursting strength, resistance to wear, pilling resistance, color fastness to washing, rubbing fastness, light fastness, color fastness to perspiration, dimension stability, inflaming retarding test etc.

    Product Home Contact/Sales Company Catalog Add To List

  • Radiant

    Konica Minolta Sensing Americas, Inc

    Radiant Vision Systems engineers advanced imaging systems to critically evaluate light, color, manufacturing integrity, and surface quality of illuminated displays and device assemblies. World leaders in manufacturing rely on Radiant Vision Systems for test and measurement solutions that ensure quality, reduce costs, and improve efficiencies. Radiant products include TrueTest™ Automated Visual Inspection systems for measurement and control, ProMetric® Imaging Colorimeters and Photometers, lenses for view angle performance measurement, and the most extensive machine vision software tool library for production-level measurement and control. We back our systems with outstanding consultative technical support, ensuring that our clients enjoy and leverage all the value built into their systems.

    Product Home Contact/Sales Company Catalog Add To List
Get Help